NVG468MQ (Router) Windows 10 Not connecting when changing Blocking/Packet Filtering/Port Forwarding on the router

Reason: Windows 10 computer not connecting to the router when changing the settings on the NVG468MQ router Firewall -> Packet Filtering / Port Forwarding / Blocking Equipment: NVG468MQ Windows 10 Solution: Short answer: Do a hard reset on the router. Long answer: While the router is ON, use a paperclip and press the reset button …

Turn on and circulate a Lasko 5538 Ceramic Heater with Arduino

Download the sketch or copy and paste the below code into the Arduino IDE. // This program allows an Arduino Uno to power on and circulate a Lasko 5538 Ceramic Heater. // // Usage: Attach an IR led (TSAL7400), but i believe any 940nm 5MM irled will work. // Arduino Uno pin 13 -> resistor -> …

Connecting a G1100 router as primary to a Actiontec MI424-WR router as a bridge

Why Wireless devices located too far from the primary router. Results in low signal strength and ultimately slower connection speed. Primary router: G1100 router Secondary router: Actiontec MI424-WR   Solution The secondary router, MI424, will be converted to a coax bridge. Following these instructions will connect your secondary router (Actiontec MI424-WR) to the primary router …